(Posting this in case anyone else is having issues having a GCC driver issues. Jump to the bottom if you want the solution rather than the long version.) My wife has a Vinyl Cutter that she uses to make these awesome signs/gifts/etc. Basically anything she can create in a drawing program she can cut out in adhesive vinyl. For years, she has used CorelDraw to do the graphic work. But this was on an old XP workstation. We needed to move to a newer platform.

One of her biggest concerns with moving to a MacBook (on loan from her daughter) was that CorelDraw wasn't available for OSX. Adobe Illustrator would work, but is far to expensive to justify the purchase. There is an open-source alternative - Inscape - that does work fairly well, but we weren't sure if it would interface well with the cutter. And it is just easier to use what you are familiar with. The solution turned out to be using vmWare Fusion.

Bengal Bn 60 Software As A Service. 7/12/2017 0 Comments 572 responses to “Know online status of claim under EPF (Employee Provident Fund)”.

I was able to create a Windows7 virtual machine, install CorelDraw it and it works wonderfully. I really like how Fusion integrates the Windows directories with the OSX ones - The Windows desktop is redirected to the OSX desktop, Documents, Downloads, etc all map correspondingly. The virtualization engine is really efficient. Even running in the VM, Windows+Corel was very responsive. BUT - I couldn't get the GCC Bengal drivers to install. Big Book Disco Funk Pdf Viewer.

This is a Taiwanese company that makes a very nice cutter, but has a HORRIBLE web site and nonexistent customer service. They have yet to return a single one of my support calls. If you go to the download section of their website, most driver/firmware files do not have file names that tell you what model they are for. You can't tell until you unzip the file - and in most cases they are using RAR compression. Brian Bromberg You Know That Feeling Rare on this page.

There is no search function. Once I located and downloaded the 64 bit driver for Windows7, it would not install. After connecting the cutter to the USB port, Windows said that it could not install a driver for that device. I ran the driver installer that I downloaded and it failed to install.

After much searching and hair pulling, I found several references (not on their website) to GCC cutters having a GCC USB mode, as well as a Common USB mode. I suspected that this might be the issue. So I found another that documented how to change the mode. None of the button combinations that were listed did anything on our cutter. My next guess was that perhaps the firmware on the cutter (we have had it for several years) was obsolete.

After downloading a half-dozen of the firmware files, I found one that was for the Bengal BN-60 cutter. They also had a firmware uploader utility. BUT the utility assumes that you have a working USB connection to the printer. Which I didn't have on that computer.

So back to the XP machine. I copied the firmware file and the uploader utility to the XP machine, and ran the uploader. It would get to about 79% completed and then time out.

More searching and hair pulling. I eventually came upon a document that mentioned turning off the cutter, pressing the Pause button, and turning it back on with the pause button held it.

The XP machine then said 'New Hardware detected' and recognized the cutter as a GCC Jaguar cutter (a different model of cutter that GCC sells). Tell Windows to auto-install the driver which it did since the driver I had on the XP box had multiple GCC devices supported. This time the firmware upload utility worked and I successfully installed the 2.05 firmware to the cutter. This version of the firmware enabled me to change the USB mode - through a series of button combinations - to the Common USB mode. Plugged the cutter back into the Macbook.

Powered up the VM for Windows7 and SUCCESS, it recognized the USB device, and configured it using the driver I had previously attempted to install. Eurolite Katalog Pdf To Word.

Welcome to Fablabs.io! Here are few suggestions about how we can help you and how you can participate and talk with us if you have any question or problem regarding the Fablabs.io platform.

Discuss with the community You can ask for support to the administrators and the whole community in the Fablabs.io Discuss section within the. We would also love to hear your ideas and suggestions regarding Fablabs.io, its features, development, how it works and how we can improve it.