NAVIGATION Service For diagnosing hardware and software problems (code-protected). The option “Service” is exclusively reserved for service work on the navigation radio performed by an authorised service company. System information The “System information” menu displays information about the software and hardware version (for service purposes). Info Points To activate/deactivate the Info Points function. In order to be able to use the Info Points function, you must have C-IQInfo Points data activated. TMC source If an external TMC receiver is connected to the navigation radio: Activate the “Ext.

VDO Dayton Map Updates. VDO Dayton: MS 4150 RS MS 4200 RS PC/MS 3200 MS 4140 MS 41400. Powered by X-Cart ecommerce shopping cart software. At times, VDO Dayton makes software updates available on its website. The latest update is version B40-070731r1 as of December 2010. Drivers Marvell 88se9128 Chipset there.

TMC Receiver” option to use the TMC receiver as the source for traffic messages. Activate the “Radio” option to use the internal tuner of the navigation radio as the source for traffic messages. This new setting will not be activated until you re-startthe system (switch off the system for 1 minute).

Loading software updates In order to extend the range of functions provided by the unit, you can load new software versions from a software update CD, if available for your navigation radio: Switch on the radio. Open the front and remove the CD if still inserted. Insert the software update CD into the CD player. A safety check appears. Confirm the check with “Yes,” if you want to overwrite the existing operating software. The new operating software is then loaded automatically.

The loading progress is indicated by a bar. A On no account must the ignition or radio be switched off during the loading procedure, even if no displays appear on the monitor for a while. Once loading is complete, you will be prompted to remove the software update CD.Please confirm the completion of the loading procedure with “OK”. The radio will then switch itself off automatically. 1 minute before switching the radio back on. The navigation radio is now ready for operation with the new operating software. You may need to change the system language according to your requirements.

TROUBLESHOOTING In rare instances, your navigation radio may not function the way you expect it to. Before calling the service department, please read the operating instructions thoroughly and go through the following check list; it may be possible to quickly remedy an apparent malfunction. Symptoms Possible cause / remedy General Navigation radio not functioning. • Check the fuse (unit and vehicle) and the connections (see installation instructions). Kitab Ul Mufradat Free Pdf Download there. Audio or map CD rejected by the unit. The CD may be dirty.

• Clean the CD with a special CD cleaning fluid. System switches off the sound during driving or Speedometer signal connected to the wrong pin of the power supply display shows “PHONE IN/MUTE”. • See pin setting ISO chamber A in the installation instructions. The operating panel of the unit feels warm. The unit always generates some heat.

The display shows “Temperature too high” and An integrated safety circuit prevents the temperature in the unit from the volume is lowered. Exceeding a certain value.

• Allow the unit to cool (set lower volume) and wait until “Temperature too high” disappears from the display. The egg timer appears and the CD cannot be • Disconnect the power supply from the unit for at least one minute then ejected. Reconnect it. If this does not work, return the unit to the Service department. The telephone is not being detected even • Call up the initialisation menu, select “Telephone ON” and select “12 V” for though it has been connected to the radio. Nokia hands-freeunits.